Water Flow Restrictor / Regulator / Water Flow Control Valve | Faucet Aerator ecoturbino DFL5 & Perlator | Water saver for sinks | Saving water and energy (electricity for hot water) | up to 40% less costs when washing hands, etc.
We’ve all been there or seen it happen. You go to wash your hands or brush your teeth and just let the water run continuously until the final rinse.
As a result, over 70% of the hot fresh water is just wasted by letting it run freely – a tremendous waste of water.
So what if you could simply reduce the cost of water, wastewater and electricity for hot water in this use?
That’s precisely where the ecoturbino pressure-independent* water saving flow limiter comes into play.
- The DFL5 water flow limiter independently limits the flow rate (see graphic) of water at the faucet to 5 liters / minute ± 10%.
- The flow limiter compensates for pressure differences, releasing the water in a steady stream, making it feel softer.
- Ecoturbino flow limiters are cost-effective WATER SAVING products that can be installed by anyone within minutes.
* Important information for hotels with, for example, 20 or more rooms. Even if all guests turn on the water simultaneously, the flow limiter works perfectly normally.
While looking for sustainable solutions, we came across the “Made in Austria” ecoturbino flow limiter. We got it, tested it, and are thrilled.
With it, you can continuously save 40% of water, energy (electricity, gas, oil, etc. for hot water production), and costs at the bathroom sink – in addition, calcification at the front only appears much later (for example about 2 years).
The small water flow limiter & perlator with a big impact!
- The water flow controller reduces water consumption regardless of pressure to 5 liters per minute.
- With 40% air admixture, a pleasant and soft comfort jet is created, resulting in a splash-free and perfect water exit.
- The water flow limiter is characterized by a very low noise level and a long service life due to “limescale protection”. Important: With local small boilers dripping through the faucet, limescale cannot be prevented.
- Suitable for M22x1 internal threads and M24x1 external thread standard holders.
Washing hands, brushing teeth, etc., with ecoturbino DFL5 means SAME behavior, MORE hygiene, LESS water, LESS cost, much LESS limescale
Why the ecoturbino® DFL5 water saving flow control valve & water saver is perfect
Saving water and especially hot water means one thing today: saving money!
Water is already expensive due to the costs of wastewater and will probably become even more expensive in the future. The situation with hot water is even worse. It has become more expensive due to the rising energy costs of electricity, gas, and oil.
Therefore, innovative solutions that offer a reduction in water consumption always provide a good savings potential that immediately reflects in costs.
And this is where the ecoturbino products come into play.
Check the point of use + Order Online
Important: If there is a local, older small boiler (Under Sink Water Heaters) on site, the faucet is often used as a pressure relief valve, and rapid calcification cannot be avoided.
Screw on the holder adapter and remove the sieve
Clean the holder adapter from side lime deposits and make it completely clean.
Attach the ecoturbino® DFL5 Perlator insert
Simply press the ecoturbino DFL5 water limiter into the holder, attach the seal and screw on carefully. Tighten carefully with a open-end wrench.
Full water jet pleasure while saving 40% water
The water jet “shines” more due to the reflecting air bubbles.
100% WATERFEELING without loss of comfort!
ECOTURBINO® & SUSTAINABILITY
facts, briefly and concisely explained
Decide NOW to purchase an ecoturbino aerator
From now on, this means for you:
- Minimal installation effort
Thanks to its standard size, this faucet aerator can easily be swapped out in fittings with M22 internal threads or M24 external threads on faucets. It only takes a few seconds to install this water saver on the faucet and reduce your consumption. - Immediately reduce electricity and water costs
Saving water, especially hot water, means saving a significant amount of money! 40% savings on water, energy & costs per cleaning process means that the small investment pays off in a very short time. - Improved hygiene
The strong swirling of the water with the addition of air reduces deposits and biofilm. The ecoturbino actively protects against contamination in the outlet head.
MADE IN GERMANY & AUSTRIA
The ecoturbino is manufactured to the tightest tolerances 100% in Germany & Austria.
THE ADVANTAGE OF THE ECOTURBINO SINK FAUCET INSERT
The ecoturbino DFL5 sink flow restrictor consistently and evenly regulates 5 liters per minute of water flow from 1 bar pressure. Even if all guests in the hotel turn on the faucet, everything runs smoothly.
WORKS PURELY PHYSICALLY
Inside the ET, high speeds are built up. As a result, air is incorporated into the water flow.
SIMPLE AND FAST INSTALLATION
Simply replace the old nozzle insert with the new ecoturbino along with the seal at the faucet holder. Tighten carefully with a wrench. Done!
+ MORE Hygiene
+ LESS Water
+ LESS Costs
+ MUCH LESS Limescale
11000 Liters Water |
Energy 450 kWh |
CO2 150 kg |
110 € Savings |
average savings per year per person
Calculate your own savings*Medical Report on ecoturbino® dated 24.07.2022: "Meets the necessary hygiene standards for use in healthcare facilities (hospital, nursing home, etc.). The retrofitting of the ecoturbino® hand shower set is recommended."
How the DFL5 eCOTURBINO® works
Water reduction with added benefits!
What does ecoturbino DFL5 offer?
It’s simple. With the ecoturbino®, you can save 40% of water immediately after installation.
A flow restrictor, also known as a water-saving aerator, water flow regulator, or water saver, is typically a “mesh device” designed to save water by increasing resistance.
It is attached directly to the faucet. Its main function is to reduce the flow rate of the water.
The ecoturbino DFL5 flow regulator works in a completely different way.
The use of the ecoturbino water saver helps to save water at the sink without significantly restricting washing comfort.
This is achieved by mixing air bubbles into the water flow, making it more pleasant and soft on the skin without noticeably changing the flow of the water.
When should you use a water saver? Simply whenever you want to save water. Due to the significant reduction of the water volume in the flow, the ecoturbino ensures noticeable savings on your water bill.
You can choose whether to install the water saver in the bathroom, toilet, kitchen faucet, or even in a hobby room.
Moreover, using the ecoturbino DFL5 is advisable when the water jet from the faucet splashes irregularly. This can happen in old buildings or with fixtures where water pressure isn’t consistent. The ecoturbino essentially “collects” the water and releases it at a consistent pressure.
Reviews
There are no reviews yet